Oce cm4521 User Manual page 401

6
2
Select the button for the bypass tray.
3
Touch [Change Tray Settings].
4
Touch [Custom Size].
The Custom Size screen appears.
5
Specify the X and Y sides of the paper, and then touch [Store].
– Make sure that [X] is selected, touch [↔] to switch between the in-
teger and the fraction, and then touch [–] and [+] to type in the
length of side X. (5-1/2 inch to 18 inch)
– Make sure that [Y] is selected, touch [↔] to switch between the in-
teger and the fraction, and then touch [–] and [+] to type in the
length of side Y. (3-9/16 inch to 12-1/4 inch)
– If a decimal value is displayed in the Custom Size screen, use the
keypad to type in the setting. For details on switching between dec-
imal and fraction values, refer to "System Settings" on page 11-20.
6-16
Copy paper/original documents
cm4521