Application functions
Blank
!
Detail
The specified paper can be inserted at a maximum of 30 locations within
a document of up to 999 pages.
In double-sided documents, one double-sided page is considered to be
two pages (one for the front and one for the back).
1
Position the document to be copied.
–
For details on positioning the document, refer to "Feeding the doc-
ument" on page 2-8.
–
For a document that exceeds 100 pages, refer to "Scanning the
document in separate batches ("Separate Scan" setting)" on
page 2-13.
2
Load the paper to be used for the insertions sheets and the main body
of the document into the desired paper trays.
–
Use paper with the same size for the insertion sheets and for the
main body of the document, and load them in the same orientation.
–
To cancel changes to the settings for all Application functions,
press the [Reset] key. All changes to the settings are canceled.
3
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
–
For details on using thick paper for the insertion sheets and on
loading the paper, refer to "Paper types and paper capacities" on
page 6-4 and "Loading paper into the bypass tray" on page 1-70.
cm4521
6
5
4
3
2
1
6
REPORT
5
4
3
2
1
6
5
4
3
2
1
6
5
REPORT
4
3
2
1
4
3
1
6
REPORT
4
3
1
7
6
7-29