Oce cm4521 User Manual page 695

11
3
Type in the administrator password, and then touch [OK].
– For details on typing in text, refer to "Entering text" on page 12-2.
The Administrator Settings screen appears.
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.
Reminder
The default administrator password is "12345678". The administrator of
this machine should change the administrator password.
Be sure to keep the administrator password in a safe place. If the
administrator password is lost, it must be specified by the service
representative. For details, contact the service representative.
11-52
Utility mode
cm4521