Basic copy operations
–
If the binding position for the document is set to "Auto", the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the document length
is 11-11/16 inch or less. If the document length is more than
11-11/16 inch, a binding margin along the short side of the paper is
selected.
–
If "Auto" is selected under "Original Binding Position", the binding
margin is set at the top or at the left.
–
If the binding position for the copy is set to "Auto", the binding po-
sition is automatically determined according to the orientation of
the loaded document. If the document length is 11-11/16 inch or
less, a binding position along the long side of the paper is selected.
If the document length is more than 11-11/16 inch, a binding posi-
tion along the short side of the paper is selected.
–
If the binding position for the copy is set to "Auto", the binding po-
sition is set at the top or at the left.
3
Touch [Binding Position].
–
For a single-sided document, select the binding position for the
copy, and then touch [OK].
cm4521
2
2-63