10
2
From the job list, select the job whose proof copy is to be printed, and
then touch [Proof Copy] key.
–
If the job to be removed from the Held Jobs list is not displayed,
touch [↑] or [↓] until the desired job is displayed.
–
If an incorrect job was selected, touch the button for the selected
job again to deselect it.
–
After the single proof copy is printed, check the print result.
How is printing of a proof copy stopped?
?
% Press the [Stop] key.
!
Detail
To change the settings, touch [Check Job Set.] in the Release Held Job
screen. For details, refer to "Printing a stored job" on page 10-17.
10-16
Managing jobs
cm4521