Basic copy operations
2.4
Specifying document settings
The following procedure describes how to specify the type of document to
be copied.
Specifying the document size (Original Size settings)
Copies can be produced after specifying the document scanning size if the
document size cannot be detected automatically or if you wish to specify a
certain document size.
1
Position the document to be copied.
–
For details on positioning the document, refer to "Feeding the doc-
ument" on page 2-8.
2
In the Basic screen, touch [Original Setting].
The Original Setting screen appears.
3
Touch [Original Size].
The Original Size screen appears.
cm4521
2
2-23