Punch Adjustment \ 02 Horizontal Position Adj. (Fs-520/Fs-607) - Oce CS655 Pro Administrator's Manual

Adjustment
3.4.4

03 Punch Adjustment \ 02 Horizontal Position Adj. (FS-520/FS-607)

Perform this adjustment for the position of punch holes in the feeding direction operated by the Punch Kit
PK-512/PK-513.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [02 Horizontal Position Adj.].
The Horizontal Position Adjustment Screen is displayed.
3
Select the desired tray.
4
Touch [COPY] tab.
The Copy Screen will be displayed.
5
Load the paper on the desired tray (main body tray or Paper inserter tray) to be adjusted, specify Punch,
then press [Start] on the control panel.
A sample pattern will be output.
6
Check the distance (a) from the edge of the output sheet to the center of the punch hole.
CS655 Pro
a
3
3-25