Oce cm4521 User Manual page 122

Basic copy operations
– If the "Separate Scan Output Method" parameter is set to "Batch
Print", touch [Finish] in the following screen, which appears while
the document is scanned with the ADF, to continue to step 5.
– Load the next batch of the document, and then press the [Start]
key.
– Repeat step 2 until all document pages have been scanned.
– If the document cannot be loaded into the ADF, place it on the orig-
inal glass. For details on the types of documents that can be loaded
into the ADF, refer to "Original documents" on page 6-26.
– To change the scanning settings, touch [Change Setting]. For de-
tails on changing the scanning settings, refer to "Changing scan
settings for each document" on page 2-36.
– The buttons that appear in the screen for changing the settings dif-
fer depending on the specified settings. Settings for the following
can be changed.
1-Sided/2-Sided, Binding Position, Zoom, Frame Erase, Center
Erase, Original Size
– To cancel changes to the settings, touch [Cancel].
cm4521
2
2-15