Selecting Finishing Settings - Oce cm4521 User Manual

Hide thumbs Also See for cm4521:

Table of Contents

Basic copy operations

Selecting Finishing settings

Various settings can be selected for sorting and finishing copies fed into the

copy output tray.

As the factory default, "Group" is selected.

If no finisher is installed and all of the following conditions are met, print-

ed copies are fed out and sorted in an alternating crisscross pattern.

8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.

Paper of the same size and type is loaded with the w orientation in one

paper tray and with the v orientation in another tray.

The "Auto" Paper setting is selected.

The "Auto" Paper setting is not selected when the "Mixed Original" set-

ting is selected.

From Administrator Settings mode, the machine can be set so that cop-

ies are fed out without being shifted when the finisher is installed. As a

factory default, the machine is set to shift the copies that are fed out.

For details on specifying settings for shifting copies that are fed out when

the finisher is installed, refer to "System Settings" on page 11-31.

For details on "Fold/Bind" and "Center Staple/Fold", refer to "Selecting a

folding setting" on page 2-96.