Oce cm4521 User Manual page 745

11
– To stop the machine when the limit specified with account track is
reached, touch [Stop Job].
11
Specify a setting for "Number of User Counters Assigned".
– Press the [C] (clear) key to erase the value, and then use the keypad
to specify the desired value (between 1 and 999).
– If user authentication and account track settings have been
applied, counters can be assigned to both accounts and users, and
counts for both can be totaled.
12
Touch [OK].
– If the setting for "User Authentication" or "Account Track" was
changed, the message "Are you sure you want to clear all data?"
appears.
13
Touch [Yes], and then touch [OK].
– To stop clearing the usage data without changing the settings,
touch [No].
– If the setting for any of the following is changed, the data is not
cleared. "Public User Access", "When # of Jobs Reach Maximum",
or "Synchronize User Authentication & Account Track"
– To cancel the setting and select the default, press the [Reset] key.
The authentication method is set.
Continue by specifying settings for user authentication and account
track.
Reminder
Do not differentiate between uppercase and lowercase letters in the user
name for the external server. Since the cm4521 cannot differentiate
between uppercase and lowercase letters, the operation may not be
performed correctly.
11-102
Utility mode
cm4521