Oce cm4521 User Manual page 732

Utility mode
9
Press the [Start] key.
– The adjustment is applied when the [Start] key is pressed. To
cancel the adjustment, press the [Reset] key instead of pressing the
[Start] key.
The adjusted test pattern is printed.
10
Check the print result.
– If there is no shift between the black and cyan lines, continue with
step 11.
– If more adjustment is necessary, repeat steps 8 and 9.
11
Touch [OK].
– To cancel the setting and select the default, press the [Reset] key.
cm4521
11
11-89