Oce cm4521 User Manual page 476

Application functions
4
Touch [Book Copy].
– [Booklet Original] does not appear if optional Finisher 9834 or sad-
dle stitcher on Finisher 9821 is not installed.
The Book Copy screen appears.
5
Touch the button for the desired setting.
– If "Separation", "Front Cover" or "Front and Back Cover" is select-
ed, [Binding Position] appears. Select the binding position of the
document.
– If desired, specify a Book Erase function. Touch the button for the
erasing method, touch [-] and [+] to specify the width of the area to
be erased, and then touch "OK".
– Touch [↔] on the Frame Erase screen/Center Erase screen to
switch between the integer and the fraction, touch [–] and [+] to
specify the width to be erased, and then touch [OK].
– If a decimal value is displayed in the Frame Erase screen/Center
Erase screen, use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to "System
Settings" on page 11-20.
cm4521
7
7-61