Oce cm4521 User Manual page 37

1
No. Part name
13 Mailbin kit 9824
14 Saddle stitcher 9822
15 Punch kit 9278
16 Output tray CM5520050
17 Video interface kit CM5520070*
18 Fax kit CM3500210*
19 Stamp unit*
20 Scan accelerator kit CM5520060*
21 Security kit CM3500260*
22 Local interface kit CM5520080*
* Parts marked with an asterisk are internal options and therefore are not shown in the illustration.
1-4
Before making copies
Description
Installed onto finisher 9821 to divide printed pages
(only with computer printing) and feed them into the
appropriate tray assigned to a specific individual or
group.
Referred to as the "mailbin" throughout the manual.
Installed onto finisher 9821 so that copies can be
bound or folded at the center.
Referred to as the "saddle stitcher" throughout the
manual.
Installed onto finisher 9821 to allow hole punching to
be used.
Collects printed pages.
Used for connecting the image controller 9839 to the
machine.
Allows this machine to be used as a fax machine.
Applies a stamp to documents that have been
scanned.
For details, refer to the User's Guide [Fax Opera-
tions].
Creates images at high speed when sending scans.
Installed to encode the data saved on the hard disk
so that the hard disk can be used more safely.
Used for connecting the authentication unit (biomet-
ric type) , the authentication unit (IC card type) and
the JScribe IC card reader/writer.
cm4521