Centering - Oce cm4521 User Manual

11
Note
Set the value by mm.
Refer to the conversion rate below.
1 in. = 25.4 mm

Centering

The starting print position at the left edge of the paper (with respect to the
paper feed direction) for each paper tray can be adjusted.
0 The starting print position is adjusted during manufacturing of the
machine. Normally, the starting print position will not need to be
adjusted.
0 Only 8-1/2 × 11 v paper can be used to adjust the bypass tray.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-51.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [2 Centering].
The Centering screen appears.
11-58
Utility mode
cm4521