Application functions
4
Select the desired stamp under "Stamp Type/Preset Stamps" or
"Stamp Type/Registered Stamps".
–
Touch [↑] or [↓] to display a different list of preset or registered
stamps.
–
Only one stamp can be selected.
5
Select the desired setting under "Pages".
–
To print the stamp only on the front cover, touch [Cover Only].
–
The stamp will not be printed on blank pages inserted using the
"Cover Sheet", "Insert Sheet" and "Chapters" functions.
6
Touch [Print Position], and then select the printing position.
–
To make fine adjustments to the printing position, touch [Adjust Po-
sition]. Select the desired direction under "Left & Right Adjustment"
or "Top & Bottom Adjustment", touch [↔] to switch between the in-
teger and the fraction, touch [–] and [+] to specify the adjustment
amount, and then touch [OK].
–
If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the adjustment amount. For
cm4521
7
7-103