11
–
Each time [+] or [-] is touched, the value is increased or decreased
by one increment.
–
If the folding position is too far to the right of the center of the paper,
touch [-] to reduce the adjustment (between -0.1 mm and -12.7
mm).
8
Touch [OK].
–
To cancel the setting and select the default, press the [Reset] key.
The center folding position is adjusted.
If the folding position was at the center of the paper in step 7, this
completes the procedure.
9
Use the "Half-Fold" setting to print another sample copy.
10
Check the print result.
–
Check that the folding position is adjusted to the center of the
paper.
–
If more adjustment is necessary, repeat steps 6 through 9.
11-72
Utility mode
cm4521