If Burrs Remain In Punch Holes Using Multi Punch Gp-501 - Oce variolink 9522 User Manual

Hide thumbs Also See for variolink 9522:

Table of Contents

Troubleshooting

If Burrs Remain in Punch Holes Using Multi Punch

If you find burrs remaining in punch holes when using the Multi Punch GP-

501, lubrication is required for the die set currently used.

Lubricate it at the position illustrated below.

Never use the oil on the general market. For the oil to be used in this pro-

cedure, please contact your service representative.

If burrs still remain in punch holes after the lubrication, apply grease to the

positions illustrated below.

Never use the grease on the general market. For the grease to be used in

this procedure, please contact your service representative.

VarioLink 9522

Troubleshooting