Network Settings; Copier Setting - Oce cm4521 User Manual

Hide thumbs Also See for cm4521:

Table of Contents

The Authentication Device Settings parameters are available only if the

optional authentication unit is installed.

Using Touch & Print, a user can print a job sent from a computer by po-

sitioning their finger or IC card on the authentication unit.

Network Settings

TCP/IP Settings

NetWare Settings

HTTP Server Settings

FTP Settings

SMB Settings

LDAP Settings

E-mail Settings

SNMP Settings

AppleTalk Settings

Bonjour Setting

TCP Socket Settings

Detail Settings

Network Fax Settings

Auto Zoom (Platen)

Auto Zoom (ADF)

Specify settings for using the network. For details, refer to the

User's Guide [Network Scanner Operations].

Specify settings for using network faxing. For details, refer to the

User's Guide [Network Fax Operations].

Select whether or not the "Auto" Zoom setting is

automatically selected when a paper tray is se-

lected (except when the "Auto" Paper setting is

selected) while a document is placed on the orig-

Select whether or not the "Auto" Zoom setting is

automatically selected when a paper tray is se-

lected (except when the "Auto" Paper setting is

selected) while a document is loaded into the

Utility mode

Default Setting