Hdd Settings - Oce cm4521 User Manual

Utility mode
The machine may not operate correctly if it is turned on immediately after
being turned off.
Enhanced Security Mode
Description
Settings necessary for applying enhanced security mode appear. Select whether or not to apply
enhanced security mode when the necessary settings are specified. For details, contact your
service representative.

HDD Settings

Parameter
Check HDD Capacity
Overwrite Temporary
Data
Overwrite All Data
HDD Lock Password
Format HDD
HDD Encryption Set-
ting
Function Management Settings
Parameter
Network Function Us-
age Settings
cm4521
Description
Information concerning the hard disk capacity is
displayed.
Specify whether or not to overwrite the temporary
image data saved on the hard disk with all opera-
tions for copying, scanning, faxing and computer
printing. For details on the settings, refer to the
User's Guide [Box Operations]. By specifying a
setting to overwrite temporary data, the area of
the hard disk where image data is saved after
printing or sending can be overwritten, and the
data can be erased. This process prevents disclo-
sure of image data on the hard disk.
Select this parameter to overwrite all data on the
entire hard disk when returning or disposing of
this machine in order to prevent disclosure of the
data. For details on the settings, refer to the Us-
er's Guide [Box Operations]. Before performing
this operation, contact your service representa-
tive.
Specify the password for protecting data on the hard disk. For details,
refer to the User's Guide [Box Operations].
Format the hard disk. For details, refer to the User's Guide [Box Oper-
ations].
This parameter appears when the optional security kit is installed to
specify encryption of the hard disk. For details, refer to the User's
Guide [Box Operations]. When a setting is specified, all data written to
the hard disk is encrypted to protect it. If the encryption key is changed,
the hard disk will be reformatted.
Description
Specify settings for network functions that are dif-
ficult to count when managing operations.
11
Default Setting
NO
Mode 1
Default Setting
ON
11-49