Separating Copies By Sets ("Sort" Setting) - Oce cm4521 User Manual

Basic copy operations

Separating copies by sets ("Sort" setting)

0 As the factory default, "Group" is selected.
0 If finisher 9821 is installed, the output tray can be selected. For details,
refer to "Selecting the output tray" on page 2-85.
0 If offset sorting is selected while no finisher is installed, printed copies will
be fed out and sorted in an alternating w and v pattern if the following
conditions are met.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" set-
ting is selected.
0 If offset sorting is selected while a finisher is installed, printed copies are
fed out and stacked on top of each other with each set shifted to separate
it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
cm4521
2
2-83