Page 2
, 9511* , 9503, 9504, 9505, CM2510030, 9506, 9507, CM2510050* , CM4010020* , ZB3500160, CM2510190 *1 Can be installed when using the cm2510. *2 Can be installed when using the cm4010. Model Number: cm2510 / cm4010 cm2510 J / cm4010 J Warranty While every effort has been made to make this document as accurate and helpful as possible, Océ...
CAUTIONS 1. Do not touch the transfer belt. Scratches or smudges on the transfer belt will cause dirty prints. 2. The fusing unit is extremely hot. Exercise care in this area. 3. Do not look directly at the light source. Doing so may damage your eyes. Fusing unit 4.
INSTALLATION REQUIREMENTS Improper installation may damage this product. Please note the following during initial installation and whenever the machine is moved. 1. The machine should be installed near an accessible power outlet for easy connection. 2. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements.
SUPPLIES Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only Océ-specified products for the toner cartridges, finisher staple cartridge, saddle stitch finisher staple cartridge, and transparency film.
Leading edge: 11/64" (4 mm) or less, trailing edge: 1/8" (3 mm) or less, near edge / far edge: total Print margins 11/64" (4 mm) or less 80 seconds or less (cm2510) Warm-up time 240 seconds or less (cm4010) Variable: 25% to 400% in increments of 1%, total 376 increments (25% to 200% when the auto...
Page 9
Approx. 246.8 lbs. (112 kg) Weight cm4010: Approx. 271.1 lbs. (123 kg) cm2510: 38-3/16" (W) x 26-3/8" (D) (970mm (W) x 670mm (D)) Overall dimensions cm4010: 39-11/64" (W) x 26-3/8" (D) (995mm (W) x 670mm (D)) (when bypass tray is extended)
SPECIFICATIONS Continuous copying speeds* Model cm2510 cm4010 Copy ratio 100% / Reduced / Enlarged Black and white Black and white Copy mode Color copying Color copying copying copying 11" x 17", A3, 8K 13 copies/min. 17 copies/min. 19 copies/min. 8-1/2" x 14", 15 copies/min.
) to 13 lbs. (49 g/m ) require the use of slow scan mode. Exit tray unit (right tray) specifications Model CM2510010 (cm2510) / CM4010010 (cm4010) Output method Face-down output Output capacity* 100 sheets (using Océ-recommended 8-1/2" x 11" or A4 paper) When tray is folded up: 11-3/8"...
SPECIFICATIONS Stand/1x500 sheet paper drawer specifications Model 9501 (cm2510) 9509 (cm4010) 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, A3, B4, A4, A4R, Paper sizes B5, B5R, 8K, 16K, 16KR Plain paper (16 lbs.
SPECIFICATIONS Large capacity tray specifications* Model 9503 Paper sizes 8-1/2" x 11", A4 (paper size change must be performed by a service technician) Plain paper (16 lbs. to 28 lbs. (60 g/m to 105 g/m Paper weight 3500 sheets (21 lbs. (80 g/m Paper capacity Paper types Océ-recommended plain paper, recycled paper and colored paper...
SPECIFICATIONS Finisher specifications Model 9504 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, Paper sizes 5-1/2" x 8-1/2"R, A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR Thin paper (15 lbs.
SPECIFICATIONS Saddle stitch finisher specifications* Model 9505 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, Paper sizes 5-1/2" x 8-1/2"R, A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR Thin paper (15 lbs.
SPECIFICATIONS Punch module specifications (for finisher) Model 9507 Hole punching 2 holes or 3 holes 2 holes: Allowed paper sizes for 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"R punching 3 holes: 11" x 17", 8-1/2" x 11", A3, A4 15 lbs.
SPECIFICATIONS Printer specifications Type Built-in Same as continuous copying speed (When printing same document continuously on 8-1/2" x 11" Continuous printing speed (A4) plain paper in non-offset mode, excluding processing time.) Printing resolution 600 x 600 dpi / 1200 x 600 dpi* (black and white printing, rotating output not performed) Printer driver type PCL5c, PCL6, PostScript 3 compatible*...
Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x 200 when file type is TIFF-S) Halftone can be selected for resolutions other than 200 x 100 dpi. cm2510: Color (8-1/2" x 11" / A4) One-sided: 35 pages/min. (200 x 200 dpi), Two-sided: 15 pages/min.
SPECIFICATIONS Optional equipment cm2510 cm4010 Automatic docment feeder Standard Exit tray unit Stand/1x500 sheet paper drawer Stand/2x500 sheet paper drawer Large capacity tray Finisher Saddle stitch finisher Punch module Printer function Standard (PCL), Yes (PS) Application integration module Network scanner function...
Page 21
Information that the administrator of the machine requires is printed on the back of this page. (Separate this page from the manual and keep it in a safe place. In addition, fill in the name of the administrator and the administrator's contact information in the left hand margin.)
TO THE ADMINISTRATOR OF THE MACHINE (Separate this page from the manual and keep it in a safe place.) Factory default passwords When accessing the system settings, the administrator password is required to log in with administrator rights. The system settings can be configured in the Web pages as well as on the operation panel. To access the system settings using the Web pages, a password is also required.
TO THE ADMINISTRATOR OF THE MACHINE Trademark acknowledgments The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. ® ® ® ® ® ® ® ® • Microsoft , Windows , Windows 98, Windows Me, Windows NT 4.0, Windows...
Page 28
The information contained in this manual is subject to change without notice to incorporate improvements made to the prod- ucts listed in this manual. This manual has been printed using a vegetable-based soy oil ink to help protect the environment. Printed on 100% post-consumer recycled paper 100 Oakview Drive, Trumbull, CT 06611...