4
7
Insert the staple car-
tridge holder, sliding it
along the rails in the
compartment.
–
Check that the staple
cartridge holder is
securely inserted as
far as possible.
8
Close the front door.
Reminder
If stapling still cannot be resumed, even after performing the above pro-
cedure, contact your service representative.
Clearing jammed staples in the saddle stitcher
!
Detail
For details on clearing misfed paper in the finisher, refer to "To clear a pa-
per misfeed in Finisher 9821" on page 4-78.
1
Remove all paper from the finisher.
4-100
Troubleshooting
cm4521