2
2
Touch [Sort].
–
To separate each set of copies, touch [Yes] under "Offset".
3
Touch [OK].
The Basic screen appears again.
Separating copies by pages ("Group" Setting)
0 As the factory default, "Group" is selected.
0 If finisher 9821 is installed, the output tray can be selected. For details,
refer to "Selecting the output tray" on page 2-85.
0 If offset sorting is selected while no finisher is installed, printed copies will
be fed out and sorted in an alternating w and v pattern if the following
conditions are met.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" set-
ting is selected.
0 If offset sorting is selected while a finisher is installed, printed copies are
fed out and stacked on top of each other with each set shifted to separate
it.
2-84
Basic copy operations
cm4521