Placing The Document On The Original Glass - Oce cm4521 User Manual

Basic copy operations

Placing the document on the original glass

0 For details on the types of documents that can be placed on the original
glass, refer to "Original documents" on page 6-26.
0 When placing the document on the original glass, be sure to lift open the
ADF at least 20°.
If the document is placed on the original glass without the ADF being lift-
ed at least 20°, the correct document size may not be detected.
0 Do not place objects weighing more than 4-1/2 lb on the original glass. In
addition, do not press down extremely hard on a book spread on the
original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the ADF
if it is installed. When a document is being scanned with the ADF open,
do not look directly at the light that may shine through the original glass.
Although the light that shines through the original glass is bright, it is not
a laser beam and, therefore, is not as dangerous.
1
Lift open the ADF if it is installed.
2
Place the document face down on the original glass.
– Load the document pages so that the top of the document is to-
ward the back or the left side of the machine.
When
loaded
in the v
orientation:
3
Align the document with the
document scales.
– For details on selecting the document orientation, refer to "Select-
ing the document orientation (Original Direction settings)" on
page 2-29.
cm4521
When
loaded
in the w
orientation:
20°
mark in the back-left corner of the
2
20°
2-11