Basic copy operations
2
Touch [1-Sided > 1-Sided] or [2-Sided > 1-Sided].
–
If "2-Sided > 1-Sided" is selected, specify the position of the bind-
ing margin and the orientation of the loaded document, otherwise
the copies will not be printed as desired.
–
If the binding position for the document is set to "Auto", the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the document length
is 11-11/16 inch or less. If the document length is more than
11-11/16 inch, a binding margin along the short side of the paper is
selected.
–
If "Auto" is selected under "Original Bind Direction", the binding
margin is set at the top or at the left.
–
For a double-sided document, touch [Binding Position], select the
binding position of the document, and then touch [OK].
3
Touch [Original Direction], select the orientation of the loaded docu-
ment, and then touch [OK].
–
For details on specifying the document orientation, refer to "Select-
ing the document orientation (Original Direction settings)" on
page 2-29.
cm4521
2
2-61