Oce cm4521 User Manual page 513

7
4
Using the keypad, type in the starting page number for printing.
– If desired, touch [Chapter], and then use the keypad to type in the
chapter number. The entered chapter number is printed if
"1-1, 1-2...." is selected under "Page Number Type".
– The setting for "Page Number" can be set to a number between
–99999 and 99999, and the setting for "Chapter" can be set to a
number between –100 and 100.
– When specifying a setting for "Starting Page Number", switch the
number between positive and negative by pressing the [ ] key.
– If a negative value is specified, the numbers are not printed until the
numbering reaches 1. For example, if "–1" was specified, the num-
bers are printed starting with "1" on the third copied page.
– To cancel the "Page Number" function, touch [No].
5
Select a setting under "Page Number Type".
6
Touch [Print Position], and then select the printing position.
7-98
Application functions
cm4521