Oce cm4521 User Manual page 668

Utility mode
Fax Active Screen
Parameter
TX Display
RX Display
Color Selection Settings
Parameter
Select Color
Left Panel Display Default
Parameter
Left Panel Display De-
fault
Job Display Setting
Copier Settings
Parameter
Auto Booklet ON
when Fold & Staple
Auto Zoom For Com-
bine/ Booklet
cm4521
Description
Specify settings for faxing. For details, refer to the User's Guide [Fax
Operations] and the User's Guide [Network Fax Operations].
Description
Select the color that indicates that the button is
selected.
Description
Select the information displayed as the default
in the left panel.
• Job List:
A list of the jobs that are being performed and
queued to be performed is displayed.
• Check Job Settings:
The currently specified copy settings are
displayed.
Select the job list information displayed in the
left panel.
• List Display:
A list of the jobs that are being performed and
queued to be performed is displayed.
• Status Display:
The progress of the job being performed is
displayed.
Description
Select whether or not the "Booklet" function is
selected automatically when the "Center Staple
& Fold" setting is selected. This parameter is
available only if optional Finisher 9834 or saddle
stitcher on Finisher 9821 is installed.
Select whether or not the preset zoom ratios are
automatically selected when the "Auto" Paper
setting is selected and a combined copy setting
or the "Booklet" function is selected.
• Auto Display Zoom Ratio:
The following zoom ratios are specified.
2in1, Booklet: 64.7%
4in1: 50.0%
8in1: 32.3%
• Off:
The zoom ratio is not selected automatically.
11
Default Setting
Green
Default Setting
Job List
List Display
Default Setting
Auto Select Booklet
Auto Display Zoom
Ratio
11-25