Printing A Proof To Check The Settings (Proof Copy) - Oce cm4521 User Manual

3
3.2

Printing a proof to check the settings (Proof Copy)

Before printing a large number of copies, a single proof copy can first be
printed so that it can be checked. This prevents copy errors from occurring.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the doc-
ument" on page 2-8.
2
Select the desired copy settings.
– When printing a proof copy, specify multiple copies.
3
Press the [Proof Copy]
key.
4
If the document was placed on the original glass, touch [Finish], and
then press the [Start] key.
– If the document was loaded into the ADF, printing of the proof copy
begins without the screen appearing confirming that scanning of
the document is finished.
A single proof copy is printed.
5
Check the proof copy.
– If the proof copy was printed as desired, continue with step 8.
– To change the copy settings, continue with step 6.
3-6
Additional copy operations
cm4521