Oce cm4521 User Manual page 677

11
Parameter
Printer Ad-
justment
Finisher
Adjust-
ment
11-34
Description
Leading Edge Adjust the starting print position be-
Adjustment tween -3.0 and 3.0 mm at the leading
edge of the paper (with respect to the
paper feed direction). Adjustments can
be specified for each paper type.
Centering Adjust the starting print position be-
tween -3.0 and 3.0 mm at the left edge of
the paper (with respect to the paper feed
direction). Adjustments can be specified
for each paper tray.
Leading Edge Adjust the starting print position be-
Adjustment tween -3.0 and 3.0 mm at the leading
(Duplex Side 2) edge of the paper for the second side
during automatic double-sided copying.
Adjustments can be specified for each
paper tray.
Centering (Du- Adjust the starting print position be-
plex 2nd Side) tween -3.0 and 3.0 mm at the left edge of
the paper for the second side during au-
tomatic double-sided copying. Adjust-
ments can be specified for each paper
tray.
2-Position Sta- Adjust the distance (between 128 mm
ple Pitch Ad- and 160 mm) between staples when
*1
justment printing with the "2 Position" Staple set-
ting ("Staple" and "Center Staple &
Fold").
Center Staple Adjust the stapling position (between
*1
Position -12.8 and 12.7 mm) when printing with
the "Center Staple & Fold" setting.
Half-Fold Posi- Adjust the folding position (between
*1
tion -12.8 and 12.7 mm) when printing with
the "Center Staple & Fold" setting.
Tri-Fold Posi- Adjust the folding positions (between
tion Adjustment -12.8 mm and 12.7 mm) when printing
*1
with the "Tri-Fold" setting.
Punch Vertical Adjust the vertical position of the
Position Ad- punched holes between -5.0 mm and 5.0
*2
justment mm.
Punch Horizon- Adjust the horizontal position of the
tal Position Ad- punched holes between -5.0 mm and 5.0
*2
justment mm.
Punch Regist Adjust the hole-punching shift for dou-
Loop Size Ad- ble-sided printing and outputting cover
*2
justment pages between -16.0 mm and 16.0 mm.
Punch Edge Adjust the sensors for detecting the pa-
Sensor Adjust- per edges when printing with a Punch
*2
ment setting.
Center Staple Adjust the stapling position (between -10
*3
Position mm and 10 mm) when printing with the
"Center Staple & Fold" setting.
Utility mode
Default Setting
0.0 mm
0.0 mm
0.0 mm
0.0 mm
128 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
-
0 mm
cm4521