Oce cm4521 User Manual page 681

11
Parameter
Job Reset
Reminder
If user authentication or account track operations are being performed,
they will be canceled after 1 minute, even if the "System Auto Reset"
parameter has been set to "OFF". However, Enlarge Display mode is not
exited when the "System Auto Reset" parameter is set to "OFF".
If user authentication settings have been specified or "Enhanced Security
Mode" has been set to "ON", the logoff from Administrator mode or user
authentication mode will be performed according to the "System Auto
Reset Time" parameter.
11-38
Description
When Account Select whether or not the settings are re-
is changed set (initialized) when the user has
changed.
This machine detects that the user has
changed when the optional key counter
has been removed or when the user has
logged off if user authentication or ac-
count track settings are specified.
When original Select whether or not the settings are re-
is set on ADF set when a document is loaded into the
automatic document feeder.
Next Job Staple Setting:
Select whether the same Staple setting
from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied.
Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Binding Position settings from
the previous job are set or the settings
are canceled when that job begins and
the settings for the next job can be spec-
ified.
Reset Data After Job:
Select whether the same settings for a
scan operation or for a fax transmission
from the previous job are set or the set-
tings are canceled when that job is com-
pleted and the settings for the next job
can be specified. (However, even if
"OFF" is selected, the destination is
cleared.)
Utility mode
Default Setting
Reset
Do Not Reset
OFF
OFF
ON
cm4521