Oce cm4521 User Manual page 720

Utility mode
5
Touch [5 Punch Vertical Position Adjustment].
The Punch Vertical Position screen appears.
6
Touch the button for the paper size to be adjusted.
If the paper size to be adjusted is not displayed, touch [↑] and [↓]
–
until the desired paper size is displayed.
7
Check the sample copy for the punch positions and for the center of
the paper.
– If the punch positions are too far above the center of the paper,
touch [+] under "Adjust Value" to increase the adjustment (between
0.1 mm and 5.0 mm).
– Each time [+] or [-] is touched, the value is increased or decreased
by one increment.
cm4521
11
11-77