Finisher Adjustment; 2-Position Staple Pitch Adjustment - Oce cm4521 User Manual

Utility mode
11.8

Finisher Adjustment

2-Position Staple Pitch Adjustment

The distance between staples when printing with the "2 Position" Staple set-
ting ("Staple" and "Center Staple & Fold") can be adjusted.
Note
[2-Position Staple Pitch Adjustment] appears only if optional finisher
9834 is installed.
0 Before making any adjustments, use the "2 Position" Staple setting to
print a sample copy. Perform the adjustment while checking the sample
that was created.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-51.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [1 2-Position Staple Pitch Adjustment].
The Adjust Spacing of 2 Staples screen appears.
cm4521
11
11-65