Oce cm4521 User Manual page 371

4
Message
Toner cartridge (X) needs to
be replaced soon.
Replace toner cartridge (X).
No more staples.
Replace the staple cartridge,
or cancel stapling.
Misfeed detected.
Reinsert the following # of
originals:
22
An internal error occurred.
Turn the main switch OFF
and ON.
If the trouble code appears
again, contact your Service
Rep.
Now Downloading Program
Data from Firmware server.
Cannot be accessed due to
unauthorized access.
Please contact your adminis-
trator.
The Administrator Password
is not valid due to unauthor-
ized access.
If any message other than those listed above appears, perform the operation
described in the message.
4-114
Cause
The toner for the indicated
color is about to run out.
Since the toner for the indicat-
ed color has run out, the ma-
chine is unable to make
copies.
The staples have run out.
Since a paper misfeed oc-
curred, the machine is unable
to make copies.
After clearing a paper misfeed,
it is necessary to reload cer-
tain pages of the document
that have already been fed
through the ADF.
The machine malfunctioned
and is unable to make copies.
À CS Remote Care was acti-
vated by the service repre-
sentative.
Á Internet ISW is being down-
loaded.
The authentication information
has become invalid since the
authentication attempts have
failed the specified number of
times.
The administrator password
has become invalid since the
authentication attempts have
failed the specified number of
times.
Troubleshooting
Remedy
Prepare to replace the toner
cartridge according to your
maintenance agreement. (See
p. 8-2)
Replace the toner cartridge
according to your mainte-
nance agreement. (See p. 8-2)
Replace the staple cartridge.
(See p. 8-36.)
Clear the paper misfeed. (See
p. 4-4.)
Load the indicated document
pages into the ADF.
Inform your service represent-
ative of the code displayed on
the touch panel.
Do not turn off the machine
with the [Power] (auxiliary
power) key while this message
is displayed.
After turning off the machine
with the [Power] (auxiliary
power) key, turn off the main
power switch, and then con-
tact the service representa-
tive.
Contact the administrator of
the machine.
Turn the machine off, then on
again.
Turn off the main power
switch, and then wait about 10
seconds before turning it on
again.
cm4521