Oce cm4521 User Manual page 405

6
4
Touch [Wide Paper].
The Wide Paper screen appears.
5
Select the size of the paper to be loaded.
– Touch [↑] and [↓] until the button for the desired paper size is dis-
played.
– If tray 1 or 2 is set for wide paper, the size cannot be changed.
6
To change the size, touch [Change Size].
The Change Size screen for oversized paper appears.
7
Specify the X and Y sides of the paper, and then touch [OK].
– Touch either [X] or [Y], press the [C] (clear) key to clear the current
setting, and then use the keypad to type in the size.
– To store a paper size of 12 × 18 w, touch [12 × 18 w]. Enter values
for "X" and "Y".
– If a decimal value is displayed in the Custom Size screen, use the
keypad to type in the setting. For details on switching between dec-
imal and fraction values, refer to "System Settings" on page 11-20.
6-20
Copy paper/original documents
cm4521