Oce cm4521 User Manual page 198

Basic copy operations
– Select the stapling position, and then touch [OK].
– When the "2 Positions" Staple setting is selected.
– When the "Corner" Staple setting is selected.
– Touch [Auto] to automatically determine the stapling position ac-
cording to the orientation of the loaded document. If the document
length is 11-11/16 inch or less, the long side of the paper is stapled.
If the document length is more than 11-11/16 inch, the short side of
the paper is stapled.
– If "Auto" is selected for the stapling position, load the document
with the top toward the back of the machine. If the document is
loaded in any other orientation, the stapling will not be correctly po-
sitioned.
– If "Auto" is selected, the stapling position is set at the top or at the
left.
– To cancel the setting and select the default, press the [Reset] key.
cm4521
2
2-91