11
5
Touch [Center Staple Position].
The Center Staple Position screen appears.
6
Touch the button for the paper size to be adjusted.
–
If the paper size to be adjusted is not displayed, touch [↑] and [↓]
until the desired paper size is displayed.
–
If the saddle stitcher is installed on optional finisher 9821, touch
buttons for the paper size and for the paper type.
7
Compare the width of the left pages of the copy sample with the width
of the right pages to check for the center of the paper.
–
If the staple position is too far to the left of the center of the paper,
touch [+] to increase the adjustment.
11-68
Finisher 9834
Finisher 9821 + Saddle stitcher
Utility mode
cm4521