Oce cm4521 User Manual page 665

11
Output Settings
Parameter
Print/Fax Output Set-
tings
Output Tray Setting
Bin Assignment
* If finisher 9821 is installed, "Tray 3" is selected as the default setting.
Note
[Bin Assignment] only appears if the optional mailbin kit is installed.
The "Bin Assignment" parameter is set to "Tray 2" only if the optional out-
put tray is installed.
AE Level Adjustment
Description
Specify the initial value for auto exposure. The higher the setting, the
more that the document background is emphasized.
Auto Paper Select for Small Original
Description
Select whether copying is permitted when the "Auto" Paper setting is
selected and either no document is placed on the original glass or the
document placed on the original glass is too small for its size to be de-
tected.
• Copy on Small Size:
The document size is determined to be A5, and copies are produced
on A5-size paper.
• Copy on A4:
The document size is determined to be A4, and copies are produced
on A4-size paper.
• Prohibit Copy:
Copies cannot be produced since the document size cannot be
detected. Before pressing the [Start] key, the paper tray (paper to be
printed on) must be selected.
Blank Page Print Settings
11-22
Description
Specify settings for faxing and printing. For details, refer to the User's
Guide [Fax Operations] and the User's Guide [Print Operations].
Select the copy output tray for
each type of job (copies, print-
outs, faxes and reports).
Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6.
Utility mode
Default Setting
Copy: Tray 1
Print: Tray 1
Print Reports: Tray 2*
Fax: Tray 2*
Not Set
Default Setting
Standard (2)
Default Setting
Prohibit Copy
cm4521