Telephone Troubleshooting; Using The Telephone Local User Interface (Lui) Utility - 3Com SuperStack 3 NBX Administrator's Manual

394 C 10: T
HAPTER ROUBLESHOOTING
Telephone
Troubleshooting
Using the Telephone
Local User Interface
(LUI) Utility
If you believe that a problem is associated with a particular telephone,
use the telephone troubleshooting procedures.
The firmware within each NBX Business Telephone and NBX Basic
Telephone includes a telephone diagnostic and configuration utility called
the Local User Interface (LUI).
To run the LUI utility:
1 Disconnect the telephone from the LAN.
2 Cycle power to the telephone by disconnecting and then reconnecting its
power connector.
For more information about NBX telephone connections, see Chapter 3
of the NBX Installation Guide.
3 To start the LUI:
On the NBX Business Telephone, press the Program button.
■
On the NBX Basic Telephone, press the MSG button.
■
4 To maneuver through the menu items:
Use the scroll buttons to view menu items
■
Use the key pad or Access buttons to select a menu item. Use the
■
Access buttons to select menu items or to enter hexadecimal digits.
LUI features on the NBX Business Telephone are shown and described in
Figure 146.
LUI features on the NBX Basic Telephone are shown and described in
Figure 147.
Table 72 describes the LUI menu items.