To modify the IP settings of a BRI Digital Line Card:
1 In the NBX NetSet - Main Menu window (Figure 97), click
Device Configuration.
2 Click the Digital Line Cards tab (Figure 98).
3 From the Select Device Type pull-down list, select T1/ISDN Board List.
4 Click Apply.
5 Select the BRI board for which you want to change the IP settings.
6 Click IP Settings (Figure 92).
If there is no IP Settings button in the dialog box, you have not yet
installed the IP licenses. You must install them before you can proceed.
Figure 92 Digital Line Card IP Settings Dialog Box — BRI
7 To assign IP addresses, enter the first address in the First IP Address field.
The system sequentially adds the remaining addresses.
Configuring and Managing BRI-ST Digital Line Cards
257