Modifying Bri Card Channels - 3Com SuperStack 3 NBX Administrator's Manual

Modifying BRI Card
Channels
A channel is an ISDN logical B channel. A channel can take a single call.
This section describes how to modify channels for an installed BRI card
and how to view the status of an existing channel.
CAUTION: Do not modify channels unless a 3Com Technical Support
representative advises you to do so. Modifying an ISDN channel
disconnects any existing calls on that channel.
To modify a channel on an installed BRI-ST card:
1 On the Digital Line Cards tab (Figure 98), from the Select Device Type
pull-down list, select ISDN BRI Channel List.
2 Click Apply. The system updates the window to show the BRI channels.
See Figure 88.
Figure 88 BRI Channel List
3 Select the channel that you want and click Modify. The Modify Channel
dialog box (Figure 89) appears.
Configuring and Managing BRI-ST Digital Line Cards 253