3Com SuperStack 3 NBX Administrator's Manual page 134

Hide thumbs Also See for SuperStack 3 NBX:
Table of Contents

Advertisement

134
C
2: D
P
HAPTER
IAL
LAN
TableEntry Create 1 48 91508 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 48, which
directs the system to look for the digits 91508 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such a
sequence, it assigns LongDistance as the class of service. Because the system
software does not use the priority value, the system leaves 0 (zero) as the
value, and assigns the call to route 1 (the route that uses the 4-port card).
TableEntry Create 1 49 91617 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 49, which
directs the system to look for the digits 91617 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
TableEntry Create 1 50 91781 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 50, which
directs the system to look for the digits 91781 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
TableEntry Create 1 51 91978 7 7 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 51, which
directs the system to look for the digits 91978 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nbx 100 900-0093-01Nbx 100

Table of Contents