Removing An Attendant Console; Configuring Attendant Console Buttons - 3Com SuperStack 3 NBX Administrator's Manual

192 C 3: D
HAPTER EVICE
Removing an
Attendant Console
Configuring
Attendant Console
Buttons
C
ONFIGURATION
To remove an NBX 1105 Attendant Console from the system:
1 In the NBX NetSet - Main Menu window, click Device Configuration . The
Device Configuration dialog box appears (Figure 49).
2 Click the Attendant Console tab. The Attendant Console dialog box
appears (Figure 63).
3 Select the Attendant Console that you want to remove.
4 Click Remove. A dialog box prompts you to confirm the removal.
5 Click Yes. The system removes the Attendant Console.
This section describes how to configure the buttons on the NBX 1105
Attendant Console. The Attendant Console buttons include:
50 Access buttons. You can assign each button two settings.
■
A Shift button. This button switches between the two settings
■
allowed for each Access button.
Four Feature buttons, located below the Access buttons.
■
Configuring Feature Buttons
To map the Attendant Console Feature Buttons:
1 In the NBX NetSet - Main Menu window, click Device Configuration . The
Device Configuration dialog box appears (Figure 49).
2 Click the Attendant Console tab. The Attendant Console dialog box
appears (Figure 63).
3 Select the Attendant Console for which you want to map Feature
Buttons.