Destinationrouteentry Create - 3Com SuperStack 3 NBX Administrator's Manual

116 C 2: D P
HAPTER IAL LAN
Table 22 Dial Plan Command Summary
Command Name
Table Create
TableEntry Create
DestinationRoute Create

DestinationRouteEntry Create

DestinationRouteOperation Create
TimedRoute Create
TimedRouteEntry Create
TimedRouteOperation Create
PreTranslator Create
PreTranslatorEntry Create
PreTranslatorEntry Delete
PreTranslatorOperation Create
ExtensionLength
ExtensionRange
ExternalSettings
Description
Creates a dial plan table.
Creates an entry in a dial plan table.
Creates a route that specifies the primary and
alternative destination device of a call.
Creates a destination route entry that
identifies a single destination device or device
list.
Creates a digit manipulation operation for a
destination route entry.
Creates a timed route (a route that the system
uses based on defined criteria for time of day
and day of week).
Creates a timed route entry specifying either a
time of day or system mode, day of the week
criteria, and the destination route to use if
that criteria are met.
Creates a digit manipulation operation for a
timed route entry.
Creates a pretranslator entry and specifies a
string of digits that are compared to the
incoming digits.
Creates a pretranslator entry and specifies a
string of digits that are compared to the
incoming digits.
Deletes a pretranslator entry or deletes all
entries for a particular pretranslator.
Creates a digit manipulation operation for a
pretranslator entry.
Specifies the length of extension numbers for
system devices.
Specifies a range of extensions for each type
of device.
Specifies settings for several aspects of
external devices.