Modifying Ip Settings For An E1 Card - 3Com SuperStack 3 NBX Administrator's Manual

Modifying IP Settings
for an E1 Card
Viewing DSP (Digital Signal Processor) Details
To view DSP (Digital Signal Processor) details:
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select T1/ISDN Board List and click Apply.
3 Select the board you want and click Status.
4 In the Board Status dialog box, select a DSP from the DSP List and click
Details (Figure 107).
Figure 107 DSP Status Window
5 Click Close to close the DSP Status window.
You can modify the IP settings for an E1 card to meet changing
requirements.
The board must be on the same subnetwork as the Call Processor to
modify IP settings.
To modify the IP settings of a Digital Line Card:
1 In the NBX NetSet - Main Menu window (Figure 97), click
Device Configuration and then the Digital Line Cards tab (Figure 98).
2 From the Select Device Type pull-down list, select T1/ISDN Board List.
Configuring and Managing E1 Digital Line Cards 279