3Com SuperStack 3 NBX Administrator's Manual page 152

152 C 3: D
HAPTER EVICE
C
ONFIGURATION
Figure 52 Device Status Dialog Box
4 View the device status and make any desired changes. Table 24 describes
the fields and check boxes on this dialog box.
5 When you finish, click Apply, and then click OK.
Table 24 Device Status Fields
Field
MAC Address
Name
Extension
Dialog Refresh
Device Refresh
Reset Device
Description
The telephone's hardware address. The MAC address
appears on the bottom of the telephone.
A unique name associated with this telephone. This
name appears in lists to help you identify the telephone.
Typically, Name identifies the telephone's user.
The extension assigned to this telephone.
Specifies how often to renew the information that
appears in the Status dialog box. The selections are:
Manual, 5, 10, 15, 30, or 60 seconds.
Forces the telephone to send a status message to the Call
Processor. During normal operation a telephone sends a
status message to the Call Processor every 30 seconds.
Reboots the telephone, which means it renews
communications with the Call Processor and receives a
new download of its operating software. You can also
reboot a telephone by cycling power to the telephone.
If the telephone has an active call, resetting the
telephone disconnects the call.