3Com SuperStack 3 NBX Administrator's Manual page 99

verification is successful, the window displays the VTLs configured at the
remote site.
Example: You have installed an NBX system in Chicago, Atlanta, and
Dallas, and you have configured two VTL connections on each of the
Chicago and Atlanta systems. The IP addresses of the three systems are:
Chicago — 192.168.15.100
■
Atlanta — 192.168.25.100
■
Dallas — 192.168.35.100
■
If you perform the Query Remote operation from the Chicago system to
the Atlanta system, the results might look like Figure 33.
Figure 33 Query Remote Window (example)
The Atlanta system (IP address 192.168.25.100) shows two installed but
idle VTL connections. If you performed the Query Remote test from the
Atlanta office and specified the IP address of the Chicago system, it
should show two installed but idle VTL connections.
How to Configure a Virtual Tie Line 99