3Com SuperStack 3 NBX Administrator's Manual page 277

5 Click Modify. Figure 105 shows the Modify Channel dialog box.
Figure 105 Modify Channel Dialog Box
6 Fill in or change the fields in the appropriate Modify Channel dialog box.
Table 45 describes each parameter.
Table 48 Channel Parameters
Parameter
Group Name
Trunk to Trunk
AutoExt
Channel Name
Board MAC Address
Channel MAC Address
Current State
Span ID/Device #
Extension
Configuring and Managing E1 Digital Line Cards
E1 ISDN PRI Options
A name that helps you identify this group in lists.
Unrestricted enables and Restricted disables the transfer of
incoming calls to another line card port. For example, you
could enable Trunk to Trunk transfers if you plan to
connect a Voice Over IP (VOIP) gateway to a line card port
and let callers use the system to access the telephone
system from a remote location and use it to make CO calls.
The extension to which an unanswered call (on this line
card port) is directed. You can assign a different AutoExt
for each period of the day: Open, Closed, Lunch, and
Other.
A name that helps you identify this channel in lists.
The MAC address of the board.
The MAC address of the channel.
The state of the board and channel.
The span number and device number.
The extension number assigned to this channel.
277