6 Click Modify. The Modify Board dialog box (Figure 120) appears.
Figure 120 Modify Board — T1 ISDN PRI
7 Click the On Line check box.
8 Click OK.
9 In the T1/ISDN Board List, verify that the entry for this card in the Status
column changes from Offline to Online. You may need to wait a minute
or two, and then refresh your browser window to see this change.
Verifying the Change in Span Status
To verify that the Span status changes from Offline to Ready:
1 Return to the Digital Line Cards tab.
2 Select ISDN PRI Span List from the Select Device Type list.
3 Click Apply.
4 Select the span from the list and click Modify.
5 Enable the On Line check box and click OK.
6 Verify that the word Ready appears in the ISDN PRI Span List line item
that corresponds to this span.
Configuring and Managing T1 Digital Line Cards
299