3Com SuperStack 3 NBX Administrator's Manual page 268

268 C 3: D
HAPTER EVICE
C
ONFIGURATION
4 In the Board Name field, you can enter a name for the board, if you want,
or you can accept Trunk, the default name that the NBX system assigns.
The name that you enter helps you to identify the board in device lists.
Modifying an E1 Span
To modify an E1 span:
1 Return to the Digital Line Cards tab.
2 From the Select Device Type pull-down list, select ISDN PRI Span List
3 Click Apply.
4 Select the span you want to modify from the Span List.
5 Click Modify. Figure 100 shows the ISDN PRI Modify Span dialog box.
Figure 100 Modify Span Dialog Box — ISDN PRI