3Com SuperStack 3 NBX Administrator's Manual page 448

448 A A: C
PPENDIX ONNE
X H.323 G
TIONS ATEWAY
Speed dial numbers can be system-wide or personal. System speed dial
numbers (700-799) apply system-wide and are programmed by the
system administrator. Personal speed dial numbers (601 through 699)
apply only to an individual telephone; they are programmed by its owner.
You can assign any of the first ten speed dial numbers in each type group,
system or personal, to any Access button on a telephone.
For more information, see Chapter 6 of the NBX Telephone Guide.
Setting Up Speed Dials
The following procedure assumes that you are logged on to the NBX
NetSet utility as an administrator, and that you know the H.323 port
extensions that were established during installation.
To set up speed dials:
1 In the NBX NetSet - Main Menu window, click Device Configuration.
2 Click the Line Card Ports tab.
3 Note the extension number of each listed NBX H.323 port.
4 Return to the NBX NetSet - Main Menu window, and click System
Configuration.
5 Click the Speed Dials tab.
6 To complete the fields:
a Note a speed dial number. (One-button dialing requires system speed
dial numbers 700 through 709.
b In the New Number field, type an H.323 extension, or an 8 (for
extension list), followed by an IP address, or a system name. Examples
are:
8192 168 1
* *
8192.168.1.15
8273@h323.nbx.com#
8h323.nbx.com#
Use those characters shown here, that is, no spaces, dashes or & signs.
c In the Comment field, enter a description with up to 30 characters,
such as Tie-line to NYC, and then click Apply.
7 Verify the speed dial entry by pressing the Feature button followed by the
new speed dial number.
15 273# (IP address plus extension)
* *
273# (IP address plus extension)
*
(extension plus host name)
(host name, defaults to AA)